Skip navigation
Please use this identifier to cite or link to this item: http://repositorio.unb.br/handle/10482/39514
Files in This Item:
There are no files associated with this item.
Full metadata record
DC FieldValueLanguage
dc.contributor.authorCandela, Diana Caterinne Sandoval-
dc.contributor.authorGomes, Thiago Ferreira-
dc.contributor.authorGoulart, Jhon Nero Vaz-
dc.contributor.authorAnflor, Carla Tatiana Mota-
dc.date.accessioned2020-10-07T13:01:32Z-
dc.date.available2020-10-07T13:01:32Z-
dc.date.issued2020-10-
dc.identifier.citationCANDELA, Diana Sandoval et al. Numerical simulation of turbulent flow in an eccentric channel. European Journal of Mechanics - B/Fluids, v. 83, p. 86-98, set./out. 2020. DOI: https://doi.org/10.1016/j.euromechflu.2020.04.003. Disponível em: https://www.sciencedirect.com/science/article/abs/pii/S0997754619304601?via%3Dihub.pt_BR
dc.identifier.urihttps://repositorio.unb.br/handle/10482/39514-
dc.language.isoInglêspt_BR
dc.publisherElsevierpt_BR
dc.rightsAcesso Restritopt_BR
dc.titleNumerical simulation of turbulent flow in an eccentric channelpt_BR
dc.typeArtigopt_BR
dc.subject.keywordSimulação numéricapt_BR
dc.subject.keywordEscoamentopt_BR
dc.subject.keywordMecânica dos fluidospt_BR
dc.subject.keywordDinâmica dos fluidospt_BR
dc.subject.keywordTurbulênciapt_BR
dc.identifier.doihttps://doi.org/10.1016/j.euromechflu.2020.04.003pt_BR
dc.relation.publisherversionhttps://www.sciencedirect.com/science/article/abs/pii/S0997754619304601?via%3Dihubpt_BR
dc.description.abstract1The aim of this work is to perform a numerical simulation of the turbulent flow in an eccentric channel for a Reynolds number ReDh = 7300. The Reynolds number is based on the bulk velocity, UBulk, the hydraulic-diameter, Dh, and the kinematic viscosity, ν. To achieve this goal, a hybrid RANS/LES turbulence model called DES-SST is used. In this formulation, special functions are computed to convert the model from RANS close to the walls to LES in more remote regions. Besides the Reynolds number, the main dimensionless parameter related to the geometry involves the narrow gap between the outer and inner walls of the pipes and their diameters, D and d, respectively. These geometric parameters are related to the eccentricity, e, and the d/D ratio. Both of these parameters were kept constant at 0.80 and 0.50, respectively, throughout the work, as the channel’s length, L = 1500 mm. The numerical results are compared with experimental outcomes for a water channel with the same Reynolds number using PIV measurements. The hybrid scheme was able to capture the onset of gap instability, short after the channel’s inlet. Furthermore, the mass flow distribution along the channel and the flow velocity patterns were also successfully predicted by the numerical code. The Strouhal number was found to be in fair agreement with the experimental result. The large-scale structures were found to spread over the whole cross-section. The main frequency produced by the oscillatory motion in the tight gap was seen to be twice as high as that found in the lateral subchannel.pt_BR
dc.description.unidadeFaculdade UnB Gama (FGA)-
Appears in Collections:Artigos publicados em periódicos e afins

Show simple item record " class="statisticsLink btn btn-primary" href="/jspui/handle/10482/39514/statistics">



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.