Skip navigation
Use este identificador para citar ou linkar para este item: http://repositorio.unb.br/handle/10482/44362
Arquivos associados a este item:
Arquivo Descrição TamanhoFormato 
ARTIGO_LowCostFilament.pdf11,1 MBAdobe PDFVisualizar/Abrir
Registro completo de metadados
Campo DCValorIdioma
dc.contributor.authorAndrianov, Artem-
dc.contributor.authorTomita, Erika Kamada-
dc.contributor.authorVeras, Carlos Alberto Gurgel-
dc.contributor.authorTelles, Bruno-
dc.date.accessioned2022-08-01T14:01:15Z-
dc.date.available2022-08-01T14:01:15Z-
dc.date.issued2022-03-07-
dc.identifier.citationANDRIANOV, Artem et al. A low-cost filament winding technology for university laboratories and startups. Polymers, v. 14, n. 5, 1066, 2022. DOI: https://doi.org/10.3390/polym14051066. Disponível em: https://www.mdpi.com/2073-4360/14/5/1066/htm. Acesso em: 01 ago. 2022.pt_BR
dc.identifier.urihttps://repositorio.unb.br/handle/10482/44362-
dc.language.isoInglêspt_BR
dc.publisherMDPIpt_BR
dc.rightsAcesso Abertopt_BR
dc.titleA low-cost filament winding technology for university laboratories and startupspt_BR
dc.typeArtigopt_BR
dc.subject.keywordEnrolamento filamentarpt_BR
dc.subject.keywordTrajetória sinuosapt_BR
dc.subject.keywordInvólucro compostopt_BR
dc.subject.keywordPolímerospt_BR
dc.rights.licenseCopyright: © 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).pt_BR
dc.identifier.doihttps://doi.org/10.3390/polym14051066pt_BR
dc.description.abstract1This paper systematically explains the methodology and results of empirical work on the development of a low-cost filament winding technology for manufacturing axisymmetric polymer composite structures with a high length-to-diameter ratio, such as tubes, motor casings, and pressure vessels. The principal objective was to examine the experiences and most optimal practices in the development of computer-controlled equipment and auxiliary tooling for the wet filament-winding process. To preclude expensive commercial software for the automated control of a winding machine, analytical equations were derived for the winding trajectory of a four-axis filament-winding machine. The feasibility of the proposed equations was successfully validated by laying the fiber along the geodesic path marked on the surface of a cylindrical mandrel with hemispherical ends. Moreover, the carbon/epoxy cylindrical casings with hemispherical ends and port openings of the same diameter were wound to determine the thickness distribution in the hemispherical dome. The fiber volume ratio in the wound composite parts was evaluated using an optical technique.pt_BR
dc.identifier.orcidhttps://orcid.org/0000-0002-3987-6267pt_BR
dc.identifier.orcidhttps://orcid.org/0000-0002-9668-953Xpt_BR
dc.description.unidadeFaculdade UnB Gama (FGA)-
Aparece nas coleções:Artigos publicados em periódicos e afins

Mostrar registro simples do item Visualizar estatísticas



Os itens no repositório estão protegidos por copyright, com todos os direitos reservados, salvo quando é indicado o contrário.