Skip navigation
Veuillez utiliser cette adresse pour citer ce document : http://repositorio.unb.br/handle/10482/10850
Fichier(s) constituant ce document :
Fichier Description TailleFormat 
ARTIGO_AssessementTensileStrength.PDF1,15 MBAdobe PDFVoir/Ouvrir
Titre: Assessement of tensile strength of graphites by the iosipescu coupon test
Auteur(s): Manhani, Luis Guilherme Borzani
Pardinib, Luiz Claudio
Levy Neto, Flaminio
Assunto:: Resistência à tração
Dinâmica estrutural
Resistência de materiais
Date de publication: jui-2007
Editeur: ABM, ABC, ABPol
Référence bibliographique: MANHANI, Luis Guilherme Borzani; PARDINIB, Luiz Claudio; NETO, Flamínio Levy. Assessement of tensile strength of graphites by the iosipescu coupon test. Materials Research Ibero-american Journal of Materials , v. 10, n. 3, p. 233-239, jul./set. 2007. Disponível em:<http://www.scielo.br/pdf/mr/v10n3/01.pdf>. Acesso em: 21 jun. 2012. http://dx.doi.org/10.1590/S1516-14392007000300003
Résumé: Polycrystalline graphites are widely used in the metallurgical, nuclear and aerospace industries. Graphites are particulated composites manufactured with a mixture of coke with pitch, and changes in relative proportions of these materials cause modifications in their mechanical properties. Uniaxial tension tests must be avoided for mechanical characterization in this kind of brittle material, due to difficulties in making the relatively long specimens and premature damages caused during testing set-up. On other types of tests, e.g. bending tests, the specimens are submitted to combined stress states (normal and transverse shear stresses). The Iosipescu shear test, is performed in a beam with two 90° opposite notches machined at the mid-length of the specimens, by applying two forces couples, so that a pure and uniform shear stress state is generated at the cross section between the two notches. When a material is isotropic and brittle, a failure at 45° in relation to the beam long axis can take place, i.e., the tensile normal stress acts parallel to the lateral surface of the notches, controls the failure and the result of the shear test is numerically equivalent to the tensile strength. This work has evaluated a graphite of the type used in rocket nozzles by the Iosipescu test and the resulted stress, ~11 MPa, was found to be equal to the tensile strength. Thus, the tensile strength can be evaluated just by a single and simple experiment, thus avoiding complicated machining of specimen and testing set-up.
Licença:: Materials Research Ibero-american Journal of Materials - Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons(Attribution-NonCommercial 3.0 Unported (CC BY-NC 3.0)). Fonte: http://www.scielo.br/scielo.php?script=sci_abstract&pid=S1516-14392007000300003&lng=pt&nrm=iso&tlng=en. Acesso em: 21 jun. 2012.
DOI: http://dx.doi.org/10.1590/S1516-14392007000300003
Collection(s) :Artigos publicados em periódicos e afins

Affichage détaillé " class="statisticsLink btn btn-primary" href="/jspui/handle/10482/10850/statistics">



Ce document est autorisé sous une licence de type Licence Creative Commons Creative Commons