Título :	Characterization of copper microelectrodes, following a homemade lithography, technique, and gold electroless deposition
Autor :	Rodríguez Martínez, Marco Antonio Felix, Lizbet Leon Valladares, Luis de los Santos Dominguez, Angel Bustamante Huamaní Coaquira, José Antonio Alvarado, Jorge Rojas Majima, Yutaka Aguiar, Jose Albino Barnes, Crispin
Assunto::	Processos químicos Oxidação
Fecha de publicación :	ene-2016
Editorial :	Rede Latino-Americana de Materiais
Citación :	MARTINEZ, Marco Antonio Rodriguez et al. Characterization of copper microelectrodes, following a homemade lithography, technique, and gold electroless deposition. Matéria (Rio de Janeiro), Rio de Janeiro, v. 21, n. 1, p. 252-259, jan./mar. 2016. Disponível em: <http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1517-70762016000100024&lng=en&nrm=iso>. Acesso em: 20 dez. 2017. doi: http://dx.doi.org/10.1590/S1517-707620160001.0023.
Abstract:	We report the fabrication and characterization of copper microelectrodes obtained by a homemade lithography technique and after gold electroless deposition. For the fabrication, planes consisting of arrays of electrodes (black in color) with bow tie shape were designed and printed on a transparent paper (Canson ltd.). Using an embroidery frame with a silk fabric, a photographic emulsion was spread on the silk and simultaneously pressing the Canson paper on it. The system was introduced into a closed box and exposed with a UV light. The designed electrode templates prevented direct exposition of the UV light over copper films and indelible ink was spread over it. After the ink was dried, the copper film is immersed into ferric acid to attack the uncovered copper parts (where there is no ink). In this way, we obtained copper electrodes with initial gap separation of ~142μm and subsequently, they followed electroless deposition of gold to make the copper electrodes to contact. For the characterization, electrical measurements were performed. They present ohmic resistance values in the order of 106 Ω produced by surface scattering of the electrons within the gold microwire and enhanced by oxidation of the copper electrodes.
Licença::	Matéria (Rio de Janeiro) - This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0). Fonte: http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1517-70762016000100024&lng=en&nrm=iso. Acesso em: 20 dez. 2017.
DOI:	http://dx.doi.org/10.1590/S1517-707620160001.0023
Aparece en las colecciones:	Artigos publicados em periódicos e afins

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.