Skip navigation
Use este identificador para citar ou linkar para este item: http://repositorio.unb.br/handle/10482/47518
Arquivos associados a este item:
Arquivo Descrição TamanhoFormato 
ARTIGO_EffectCitricAcid.pdf4,42 MBAdobe PDFVisualizar/Abrir
Título: Effect of citric acid on the properties of sapwood of Pinus sylvestris submitted to thermomechanical treatment
Autor(es): Crisóstomo, Matheus Couto
Del Menezzi, Cláudio Henrique Soares
Militz, Holger
Kurkowiak, Katarzyna
Mayer, Aaron
Carvalho, Luísa
Martins, Jorge
ORCID: https://orcid.org/0000-0003-3369-2392
https://orcid.org/0000-0001-7083-9491
https://orcid.org/0000-0001-8259-1366
https://orcid.org/0000-0002-1108-9771
Afiliação do autor: University of Brasília, Faculty of Technology, Department of Forest Engineering
University of Brasília, Faculty of Technology, Department of Forest Engineering
University of Goettingen, Wood Biology and Wood Products
University of Goettingen, Wood Biology and Wood Products
University of Goettingen, Wood Biology and Wood Products
Polytechnic Institute of Viseu, Department of Wood Engineering
Polytechnic Institute of Viseu, Department of Wood Engineering
Assunto: Ácido cítrico
Madeira
Tratamento termomecânico
Data de publicação: 9-Set-2023
Editora: MDPI
Referência: CRISOSTOMO, Matheus et al. Effect of citric acid on the properties of sapwood of Pinus sylvestris submitted to thermomechanical treatment. Forests, v.14, n. 9, 1839, 2023. DOI: https://doi.org/10.3390/f14091839. Disponível em: https://www.mdpi.com/1999-4907/14/9/1839. Acesso em: 26 jan. 2024.
Abstract: The present study aimed to evaluate the effect of citric acid on the properties of solid pine wood, which were submitted to thermomechanical treatment. A preliminary test was performed in a previous study to evaluate the influence of different temperatures of pressing and concentrations of citric acid on the physical properties of wood. After choosing the best treatments (170 ◦C and 5% and 10% of citric acid), the effect of these on the chemical properties (SEM, FTIR and pH); on the density profile using an X-ray microtomography and on the resistance to aging through an abrasion test were evaluated. The result of the chemical analysis showed an increase of the presence of ester functional groups, as well as better coverage and higher acidity of the surface. The density profile technique allowed us to observe the formation of peaks of density on the surface where the acid was applied. Lastly, it was also possible to verify an increase in the resistance to abrasions because of the application of citric acid.
Unidade Acadêmica: Faculdade de Tecnologia (FT)
Departamento de Engenharia Florestal (FT EFL)
Programa de pós-graduação: Programa de Pós-Graduação em Ciências Florestais
Licença: Copyright: © 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).
DOI: https://doi.org/10.3390/f14091839
Aparece nas coleções:Artigos publicados em periódicos e afins

Mostrar registro completo do item Visualizar estatísticas



Os itens no repositório estão protegidos por copyright, com todos os direitos reservados, salvo quando é indicado o contrário.