Skip navigation
Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.unb.br/handle/10482/48607
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
ARTIGO_Low-CostWireless.pdf3,49 MBAdobe PDFVisualizar/Abrir
Título : A low-cost wireless multinode vibration monitoring system for civil structures
Autor : Ribeiro, Renan Rocha
Sobral, Rafael de Almeida
Cavalcante, Ian Barreto
Veloso, Luís Augusto Conte Mendes
Lameiras, Rodrigo de Melo
metadata.dc.identifier.orcid: https://orcid.org/0000-0002-7699-3171
https://orcid.org/0000-0002-4347-384X
https://orcid.org/0000-0003-3804-9427
metadata.dc.contributor.affiliation: University of Brasília, Faculty of Technology, Department of Civil and Environmental Engineering
University of Brasília, Faculty of Technology, Department of Civil and Environmental Engineering
University of Brasília, Faculty of Technology, Department of Civil and Environmental Engineering
University of Brasília, Faculty of Technology, Department of Mechanical Engineering
University of Brasília, Faculty of Technology, Department of Civil and Environmental Engineering
Assunto:: Monitoramento
Estrutura (Engenharia Civil)
Fecha de publicación : 1-ago-2023
Editorial : Wiley
Citación : RIBEIRO, Renan Rocha et al. A low-cost wireless multinode vibration monitoring system for civil structures. Structural Control and Health Monitoring, [S. l.], v. 2023, art. ID 5240059, 16 p., 2023. DOI: https://doi.org/10.1155/2023/5240059
Abstract: Structural health monitoring (SHM) has gained importance because many structures are approaching the end of their design life and demanding maintenance and monitoring. Low-cost solutions may push forward a widespread implementation of SHM on infrastructures but further investigation is still required to assess the performance of technically accessible, simple, and scalable low-cost systems. Tis work presents the development and validation of a low-cost vibration-based SHM multinode wireless system, based on the Arduino platform, for identifcation of modal parameters in civil infrastructures. Full details about the hardware and source code of the system are disclosed in an open repository, allowing its reproduction even by non-specialists in electronics. Te sampling frequency stability of the system is experimentally characterized, and interpolation postprocessing algorithms are proposed to solve inherent limitations. Te system is validated, and its performance is investigated in impulse and ambient vibration tests performed in a real-scale slab and a high-grade system. Te data obtained from the proposed system in impulse tests allowed estimation of natural frequencies within 2%, and MAC values around 0.3 to 0.9, in relation to those estimated with the high-grade system. However, the low-cost system was unable to produce usable data in ambient vibration tests.
metadata.dc.description.unidade: Faculdade de Tecnologia (FT)
Departamento de Engenharia Civil e Ambiental (FT ENC)
Departamento de Engenharia Mecânica (FT ENM)
Licença:: Copyright © 2023 Renan Rocha Ribeiro et al. Tis is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
DOI: https://doi.org/10.1155/2023/5240059
Aparece en las colecciones: Artigos publicados em periódicos e afins

Mostrar el registro Dublin Core completo del ítem " class="statisticsLink btn btn-primary" href="/jspui/handle/10482/48607/statistics">



Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.